This white corner trim is used by many different sectors on both internal and external corners. White corner trim can provide edge and corner protection, as well as being a solution to hiding damaged or uneven surfaces.

Plastic angle trim is an L shaped profile, it is available in both equal and unequal leg sizes. Popular sizes include 10mm, 20mm, 25mm, 30mm, 50mm and 100mm with plenty of other sizes widely available. Often used for corner protection and edge trimming. Plastic angle trims in different colours We recommend using a cloth or duster and a little washing up liquid product to polish and remove any smears, stains or finger prints without scratching the trim. Plastic angle trim is manufactured by an extrusion process. Raw materials in the form of compound are fed into an extruder machine. The compound is heated and the molten polymer is pushed through a die. The die is a tool used in manufacturing to form material to a desired shape of the plastic trim. In this case the shape is a 90-degree L shape angle. The plastic profile is held in shape by formers and goes through water baths as part of the cooling process. The plastic angle trim then hardens upon cooling. The PVC we use for our rigid plastic angle trims Our plastic angle trims are manufactured using an external grade rigid PVC, therefore it is suitable for being used outside as well as inside. Choose the right shape and size plastic (PVC) angle trim

Plastic edging is available in several different designs. This includes flat bar strips, plastic lipping, plastic channels, plastic angle trim, plastic J channels and capping. They will all cover edges but have different numbers and styles of faces depending on your own particular project requirements. We have 45 different sizes of white plastic angle trim, in sizes as small as 5mm going up to the largest at 100mm. Short pre-cut samples are available upon request which are then posted to you. There is an extra charge for the colour and a much larger meterage requirement is required. This is quoted upon request and depends on the size of the PVC angle trim, but the average is 2000 metres. White plastic angle trim We manufacture PVC angle trim in our UK factory and we are a member of the Made In Britain organisation. They enable buyers and consumers to identify a wide range of British-made products.

Our plastic PVC angle trim is priced competitively on a like for like basis, for exactly the same product made with the same standard of quality.

The plastic we use for our plastic angle trims is an external grade rigid PVC which means our plastic angles are suitable for using outdoors as well as indoors. This type of plastic is also known generally as uPVC, even though uPVC actually is a different type of material. Our product is also often referred to as uPVC angle trim. How to fix a Plastic angle trim We have customers from almost every sector who use our right angle PVC trim, our range of customers is very broad. Sectors that use our plastic angle trim include fitout, construction, signage, builders, architects, hoardings, film studios, refrigerated vehicles and shopfitting to name but a few. Typically it is used as corner trim and corner protection because the angle of the trim is 90 degrees so the trim works well on corners and edges. But it can also offer many other solutions. Using a plastic angle as a corner trim We recommend measuring the length and height in Centimetres of the tiled area with a tape measure and add these measurements together. This calculation should give you the overall amount of tile trim required in metres. Our trims are supplied in 2.5 Metre (250CMs) lengths. How do I fit Straight Edge Tile Trims? Plastic corner trim is often used to protect corners of walls from damage in a variety of settings including hospitals, schools, care homes and offices. Anywhere where people or objects are moving, leading to potential harm for hard surfaces.