Forced Action Mixers The SoRoTo range of forced action mixers offers machines which can mix up to 12 bags of gravel in each mix. Designed and built in Denmark. On this project, there’s an old concrete base beneath. It’s in less-than-brilliant condition, but it’s suitable as a base for a bound aggregate.

Setting time refers to how long it takes for the glue to dry after being applied before attaining its final strength and bonding characteristics. Some glues have shorter setting times than others, so it is important to choose one with a suitable setting time depending on your project needs and timeline requirements. Ease of application Resin Bound Training Course A comprehensive one-day program designed to equip participants with the knowledge and practical skills required to install resin bound surfaces effectively. I have never used a garden sprayer before, but wow, it’s super easy. You push down on the pump a few times until you feel some resistance and then you start spraying away.One upside to resin-based surfaces, they are very low maintenance. Always follow the instructions provided by the resin manufacturer before cleaning. In most cases, a gentle power wash is all that will be needed to clean the surface. Specialist Sand Intended to be added to each mix to improve adhesion and increase strength, Chelford 52 sand is great for use in resin bound Cover the aggregate evenly but do not use too much binder (or too little). View Gravel-Lok coverage guide > In 2018 a group of scientists became curious as to whether or not a polyurethane binder over gravel could act as a substitute for asphalt. Their findings were in the affirmative. As it turned out, the poly binder worked just as well to constrain gravel as asphalt. This proved that pour on binders could indeed be effective enough for use on slopes, roads, and other places that endure hard use.

Water-resistant glue provides superior performance when exposed to moisture or water over extended periods of time. It is important to select a glue that is specifically formulated for water resistance if the project will be regularly exposed to wet conditions. Shelf life Kneeling Pad - The Comfy Bull As resin bound installers spend a lot of time knelt, The Comfy Bull offers protection for knees and shins, helping to reduce fatigue and injury For a more controlled application and better results, a pressurised sprayer can be used instead of a watering can. If using a pressurised sprayer, evenly coat your stones at the rate of approximately 0.5 litres per square metre and try to avoid run-off. Sprayers can be flushed with white spirit between GravelHold uses which will help to remove any residue and prevent the binder from curing inside the sprayer. Plastic Plyboard An eco-friendly and more durable alternative to traditional plyboard, RecoPly is made from 100% recycled plastic and lasts up to 25 years. Resin Bound Training Course A comprehensive one-day program to equip participants with the knowledge and practical skills required to install resin bound surfaces effectively.If you do not have existing gravel we can supply prepared clean and dry gravel in a wide range of colours.

Changes in temperature and humidity can have an effect on the application process and the time it would take to cure. If there is a prediction of rain or it's very damp, then the application should not be done. If there is a chance of rain within 24-hours of the application it is advisable to cover up the resin to protect it and prevent water from reacting with the uncured resin. Again, it's always advisable to follow the guidelines set by the manufacturer and what suitable conditions should be.Lawn Edging & Stakes A range of recycled plastic lawn edging products for creating separation and segmentation on landscaping projects, along with suitable fixings. Resin Bound Gravel & Aggregates Including washed & kiln-dried gravel, crushed glass and specialist sand, Daltex is the best known range for resin bound gravel. Excess saturation may prevent the resin from drying properly. Use an applicator such as a watering can for controlled flow.