I should be using washers on the Sherpa mounting bolts as you did. 🙂 I’ll add those next time I work on it. Added small hexagonal shape to the rear of the cowling. This makes it slot into the X-Carriage even more, thanks @probably-Erwins-Cat for pointing that out. Closes #3 f.close();exec(compile(code, __file__, 'exec'))" install --record /opt/tmp/pip-6qg2mo-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /share/CACHEDEV1_DATA/.qpkg/Entware-ng/tmp/pip-build-qbGM6r/sabyenc/

x86_64-openwrt-linux-gnu-gcc: /opt/lib/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by x86_64-openwrt-linux-gnu-gcc) Install Heatset-Inserts into Spacers, if your Extruder gets screwed down from the top also install Heatsets into the Cowling Install everything to the X-Carriage, secure with 2 M3x35 BHCS from the front and 1 M3x20 BHCS from the rear For Material Requirements, Print Settings and How to Interpret the file naming structure, please see: "Print_Settings_and_File_Key.txt"For the groove-mount V6 or the Zodiac Dragonfly BMO, slide the groove at the top of the heatsink into the main Mini-AfterSherpa body, then secure it in place by sliding the other mount part in behind the toolhead. Mine came with a long stepper extension cable, so I ran that up to the mainboard and shortened the stepper’s cable so they can be unplugged along with everything else to remove the effector.

LDO has at least 2 motors that should work with this application: 36STH171004AHG and 36STH200504AHG (both are listed as working with the orbiter.) Wantai probably has 2 or 3. I've seen references to people using Wantai 36BYGH218 with the orbiter. There's a good chance that Stepperonline has 1 or 2 NEMA14 models that have the same size spur gear, but I haven't seen any references of people using one of them with the mini extruders. I’m running the stepper at only 350mA based on some other posts I found, but will give 850mA a try as you have… since it’s not even getting warm at 350mA. Apparently the FYSETC Sherpa doesn’t use a genuine LDO stepper like yours did, so we’ll see how that goes. Update Cowling ducts to the improved ones from the V0.2r1 Release. Rapido Cowlings are using the old ducts for now. I recommend reading this post from Orbiter author to better understand all the benefits of this extruder. Sherpa MiniSherpa Mini Skid Steer Loaders are compact, versatile and extremely manouverable machines suitable for indoor and outdoor uses and perfect for working in tight spaces and restricted access areas. Its small size and wide range of available attachments makes it the ideal machine for many industries and work environments ranging from farm/equestrian yards and stables to tree surgeons/arborists to landscaping/paving contractors and demolition contractors. This is the Sherpa Mini Extruder, a ground up design developed by Anlin and the team at Annex Engineering. It's a dual geared hobbed filament extruder designed for use with any printer. It features a 50:10 or a 50:8 gear driven design to provide torque while being able to be near silent. You must perform your own tuning to get the best results. Standard Voron Print-Settings (0.2mm Layer Height, 4 Perimeters, 40% Infill, 5 Top- and Bottom-Layers). No Supports are needed and all STLs are oriented the correct way and ready to import and print. Assembly