Decking Rescue Paint 2.5L Deep Blue [39147]

Product Information

When thinned with the correct thinner after a day it had cured 100%, was hard and had a much better finish. Contains a fine poly coated mineral aggregate for slip resistance and an added extender for extra flexibility. This may be for brush painting, but is especially true for airbrushing, where the paint needs to be able to pass through the nozzle ( consistency of semi-skimmed milk!

Please complete the full form and then press submit at the bottom of the page to complete application. I'm building a 1/350 USS Birmingham from Very Fire and the manual indicates that I need some deck blue. Marine Boat Deck Paint Enamel Product name Universal PU Enamel is a single pack polyurethane based boat enamel designed for use as a refinishing paint for boat and barge Decks.PLEASE NOTE: Low temperature and high humidity will adversely affect application, drying and performance of any coating. Although every effort has been made to ensure the colour in our image is as close as possible to the actual paint colour, we cannot guarantee an exact colour match. Non Slip Deck Coating is a durable coating for deck areas - contains fine granules for a non-slip finish.

We use the best value couriers available, and we will endeavour to get your products to you as quickly and as cost effectively as possible. I use tap water for my acrylics - the tap water is very soft ( my electric kettle is 20 years old hasn't furred up! Make sure the existing paint is in good condition prior to painting, then lightly abrade to provide a key for good intercoat adhesion. LUSTRE Marine Deck Paint provides a hardwearing finish and is glossy if used on its own or a semi-gloss if used in conjunction with SML Anti-Slip Beads. If you are using an airbrush, never thin in the cup - use an external pot - I use plastic shot glasses - it's easier to gauge the consistency, and if something does go wrong, you can ditch the glass.I will check later if they can deliver to Hong-Kong where I live, otherwise will use a forwarder I guess. and never pre seal the floor prior to painting espesally with laytex or PVC selaers paint will not stick.

Before putting paint down ensure you have good ventilation to allow vapor to escape, ventilation is also necessary to keep the drying times, if there is no air movement the coating cannot dry as well.Choose a coloured decking paint, like blue, grey, or green, and enjoy a fresh feel and stylish finish. The answer depends upon what you use to put paint on, and what your preference (alcohol based acrylic, water based acrylic, lacquer, or enamel) is.

the idea is that the thinning agent (in my case Tamyia X-20A) helps the paint spread in smaller quantity, but then it will evaporate, leaving on the surface of the model only the paint itself. These charges are solely dependent on your local customs office and the courier, we have no control over these charges.Please note images and product titles are for advertising purposes only, tins are supplied in BC Paints cans or plain white for, 1 and 2. Due to the oil type of T A Paint’s Single Pack Polyurethane Marine Boat Deck Enamel, the coatings is able to overcoat a wide range of old coatings without attacking it.