R86S Soft Routing Multi-net port, Intel mini host N5105 N6005 8GB/16GB/32GB 10 Gigabit fiber port 2.5G (U3 Black)

Product Information

These little systems are surprisingly good, albeit not without their quirks, as we have discussed in this review. Even though we found a few things in the previous generation that we would change and were changed in this generation, we also bought extras to use in the lab after reviewing the previous generation. It is also notable that this is a higher-quality build than something like the 4x 2.5GbE and 2x 10GbE Intel Core Firewall and Virtualization Appliance that we reviewed. The R86S line’s build feels like it is of higher quality. Final Words En cualquier caso hay que comentar que tanto el SSD NVMe como la WiFi M.2 no forman parte del R86S aunque, para esta Revisión, han sido gentilmente suministradas por la gente de GoWin. For this test, I enabled Zenarmor on one interface and Suricata on the other interface since they both cannot run on the same interface at the same time due to limitations with netmap. Typically you would run Suricata on the WAN and Zenarmor on the LAN.

R86S-U firewall router first shot - Reddit AMA for the Gowin R86S-U firewall router first shot - Reddit

To keep this installation guide more general, I am going to assume you are not going to use a LAGG. You may enter “N” or press “Enter” since “N” is the default value to skip configuring LAGGs. One side is blank, and if you never open the system, you will have no reason to visit this side of the chassis. R86s Pro Side

Select the “USB Key” option if you are using a USB flash drive. There is also a “USB Drive” option which may be used for external hard drives. It seems as though external USB hard drives are recognized separately from USB flash drives so you need to ensure you are selecting the correct option or you will not be able to boot from your USB drive. You will also notice the name of your USB drive so that can help you choose the proper device. The R86S originally had 3 different series models: the “B”, “P”, and “G” series. Within each series there were various configurations to choose from. The “B” series is fanless, has the slowest CPU of all the models, and only has 2.5G interfaces. The “P” series has a faster CPU than the “B” series, a fan, and only has 2.5G interfaces. The “G” series has the same or faster CPU than the “P” series, 2 fans, and has both 2.5G and 10G interfaces. The higher end models of each series (except for the “B” series) includes WiFi 6 and Bluetooth. Since we have seen the N305 many times, we just wanted to confirm that we are getting the expected performance. Python Linux 4.4.2 Kernel Compile Benchmark Reboot OPNsense and you should now see the 10G interfaces to assign! When I saw how easy it was enable the 10G interfaces, I was very happy because I have been wanting to test this system for quite a while. Performance Por ello igual que el Zimaboard 832 que revisamos el pasado año además de poder con Linux puede con Windows! Eso sí Tiny11 que viene a ser una versión mínima pero totalmente funcional de Windows 11 y que tan solo necesita 8 GB de almacenamiento y 2 GB de RAM.

R86S-U1 with Mellanox ConnectX-4 MCX4421A-ACQN GW-R86S-U1 with Mellanox ConnectX-4 MCX4421A-ACQN

The card is located in the bus ID 04, with the device number 00. Additionally, the two functions of the two interfaces have IDs 0 and 1, respectively. Entry-level models have an Intel Celeron N5105 processor, 8GB of RAM, no wireless card, and just three 2.5 Gbps Ethernet ports. But you can pay extra for models with up to a Pentium N6005 processor, 16GB of RAM, WiFi 6 + Bluetooth, and five Ethernet ports (2 x 10 Gbps + 3 x 2.5 Gbps). R86S G3– Intel AX201 WiFi 6 & Bluetooth 5.2 module soldered on mainboard plus two external antennas In the BIOS, you have to set it to boot off of the USB drive since it is not configured by default. Go to the “Boot” menu by pressing the “right arrow” key several times. You will see it is set to boot from the eMMC hard disk by default. Press “Enter” so you can select a different boot device.You should see something similar to the following screen after OPNsense has booted. Configure OPNsense A few complaints: the fan is a bit loud, but understandably so as it needs to cool 10W CPU + 2×10 GBe, and the box came with Intel AX201 which does not support AP mode over 5G.

R86S Pro is an Everything Revolution with 25GbE This GoWin R86S Pro is an Everything Revolution with 25GbE

In my country there are wireless restrictions, so I would be happy to have a model without WiFi, with SPF+ port and a lot of RAM on it. It's important to be aware that the GW-R86S-U* models come equipped with an OCP connector, which facilitates communication via PCIe 3.0 x4 with the CX341A card. These models have been specifically designed to be a seamless fit with the CX341A card. If you're looking to replace the CX341A card, the ideal option would be the CX4421A in the version MCX4421A-ACQN. The idle power consumption on the R86S-U4 is about 13-14W and that is with most of the network interfaces populated. Unplugging the SFP+ cables seemed to drop the wattage nearly 2W. During testing IPS/IDS performance, the wattage jumped to 25-26W at 50% CPU utilization. When I booted the system, the wattage surged to about 24-25W.

At this point, we had a sense of the outcome, but we saw a similar performance from OPNsense 22.7. R86s Intel N6005 OPNsense Iperf3 Performance