HOHXEN 115mm Hole Saw,M44 HSS Bi-Metal,Hole Opener Drill Bit Cutter Tool for Wood Aluminum Iron Sheet Pipe Plastic

Product Information

This saw is particularly suitable where there is a requirement for a high-quality surface finish on the entry and exit hole and provides a smooth cut when cutting traditional lath and plaster. Tungsten Carbide Tipped Multi Purpose (MPH) Hole Saws feature a unique tooth set for ultra-aggressive, high performance cutting of non-metallics.

115mm 1PCS Hole Saw Cutter M42 Bi-Metal Hole Saw Drill Bit

This 3-ply tooth grind delivers a fast cut, minimal snag when the saw begins the cut, efficient swarf removal minimising heat build-up and maximum saw life. The Starrett CTD hole saws feature three different angles ground onto the cutting face of each tooth on the saw. Featuring a synthetic diamond grit cutting edge permanently bonded to a tough steel body, this provides the necessary clearance for cutting at high speeds. Standard arbors with a pilot drill are suitable for use with hole saws from 14mm (9/16") diameter to 210mm (8. The ULTI-MATE rapid release arbor system from Starrett offers super fast, tool-free changes between different diameters and types of hole saws, without adjustment of the drill chuck.

These hole saws will produce clean, accurate cuts time and time again and offer extended product life well beyond that of conventional tools. The Deep Cut saw features an increased depth of 51mm (2") and is ideal for cutting metal and tubes with a thickness of greater than 3mm, and wood up to 51mm (2") thick. The removal of the core from the hole saw after a cut is also much improved by the rapid release of the hole saw from the arbor.

Erbauer Multi-Material Holesaw 114mm - Screwfix

Its tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf. They are particularly suitable for plumbers, electricians and other installation engineers and an invaluable tool in the construction of flues, air vents and plumbing or electrical channels. Our selection includes various sizes and shapes, allowing you to choose the perfect tool for your project needs.

Starrett Diamond Brick and Masonry Dri-Core Drills are designed for intensive dry cutting on brickwork and blockwork. The diamond-tipped edge is produced from a uniform coating of synthetic diamond grit bonded to a durable steel platform, which provides exceptional performance at high speeds and effective cutting action on brick, non-hardened glass, ceramic, tiles and stone. A cost-effective solution for cutting through nail-embedded wood, or virtually any wood and metal combination, reinforced concrete, and fibreglass. High performance Diamond Grit Tile Drills are ideal for drilling small diameter holes in many non-metallics.